Hudson Reed Traditional Twin Exposed Thermostatic Shower Valve – Chrome – A3099E

A Hudson Reed traditional twin exposed valve with separate controls for temperature and flow. Operates one shower accessory: rigid riser kit. Suitable for all types of plumbing installation this shower valve has the added safety benefit of a built in anti scald device should the cold water supply fail.

Product Details

• Depth – 136mm
• Distance between hot & cold centres – 150mm
• Water Pressure – LP1 – 0.1 bar pressure minimum
• Traditional Design
• Accurate flow control.
• Thermostatic control to +/- 2 to 3 &°C even if the water pressure fluctuates.
• Full thermal protection to prevent scalding in the event of hot or cold water shut off.
• In the event of hot or cold water failure, the valve will shut down as per the relevant standard.
• The patented cartridge is highly resistant to calcium build up – even in hard water areas.
• Our valves are suitable for use with all systems: gravity fed, pumped, unvented high pressure or fully modulated combi-boilers.
• Excellent flow rates – even at low pressure.
• The cartridge is fully reversible, meaning if hot and cold supplies are the wrong way round, it doesn’t need re-plumbing.
• Simply remove the cartridge, turn 180°C and replace.
• Standards – EN200 and/or WRc/NSF
• Suitable for all plum bing systems
• Connection Outlet: 15 mm (1/2″ BSP)
  

20 Year Warranty

Flow Rates

0.1 Bar – 4.5 l/m
0.5 Bar – 13 l/m
1 Bar – 18.5 l/m
2 Bar – 26 l/m
3 Bar – 33 l/m